ITX-Y86_D11L VER

1,245.00

Category:

Product number  :ITX-Y86_D11L VER:1.0

processor : Support Intel® PGA 946 Intel® haswell fourth generation Celeron/Pentium/Corei3/i5/i7 series processors

chipset :Using Intel®HM86 Express Chipset,

RAM : 1*SODIMM memory slot, support 1600/1333MHz DDR3L/1.35V memory, maximum support 8GB

Show : Integrated Intel®HD Graphics core graphics 1*VGA, 2*HDMI interface, 1* LVDS interface, support dual channel 24BIT

Support : VGA/HDMI/LVDS synchronous/asynchronous display

The internet : 1* RTL8111H Gigabit Ethernet chip, support Wake on LAN/PXE function

Store : 2* SATA hard disk interface, where SATA1 is 2.0, the transfer rate is up to 3Gbps, SATA2 is 3.0, the transfer rate is up to 6Gbps
1* MSATA slot, support Intel protocol SSD solid state drive, transmission speed up to 6Gbps

Audio : Onboard ALC662 6-channel high-fidelity audio controller, support MIC/Line-out, power amplifier Power amplifier supports 2Ω/5W dual channel

Expansion slot : 1* Mini-PCIE slot, support WIFI module

Backplane I/O interface =

2* USB3.0 interface, 2* USB2.0 interface

2* HDMI interface

1* DB15 VGA interface

1* RJ45 Gigabit network interface

1* Line-out (green), 1*MIC (red)

1* DC19V power input interface

Built-in I/O interface =

1* JVGA interface 1*12pin, the same signal as DB15

1* LVDS interface, 2*15pin, support dual channel 24BIT

1* Screen backlight power supply interface 1*6pin

1* Screen brightness adjustment interface 1*4pin

1* RS232 serial interface 2*5pin,

4* USB2.0 interface 2*5pin

1* Front audio interface 2*5pin

1* power amplifier interface 1*4pin

2* Hard disk power supply voltage interface 1*4pin

1* Front panel function button and indicator port 2*5pin

1*4pin ATX power interface. Support 19V power input and output

Fan interface = 1*4pin CPU intelligent fan interface; 1*4pin system intelligent fan interface

BIOS = 64Mb Flash ROM

GPIO =Support 4 input and output GPIO function

support system = Windows® 7/ 8.1/ 10

Watchdog = Support hardware reset function (256 levels, 0~255 seconds)

Power type = Support DC19V power supply

Operating temperature = -10℃~60℃

Storage temperature = -20℃~70℃

Working humidity = 5%-95% relative humidity, non-condensing

size : 170mm x 170mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…